Typically terminals will have auto-settlment enabled but should you need to manually settle, below are the steps:
Press on Settlement icon from 2nd page of home screen (or press [Enter] to get to main menu and select Settlement)
Enter password, if prompted
Terminal will display "close batch and deposit funds"
Select YES
Batch will close and print settlement report
If your terminal shows that the batch is out of balance please reach out to our support team or to the processor directly to resolve.
Verifying Auto Settle Time -
To verify the current Auto Settle time on the terminal file:
Press ADMIN or [.,#*]
If prompted enter password, press [Enter]
Select 3 - Setup Menu
Select 5 - Trans Options
Select 4- Settlement
Scroll to #6- Auto Settle - this is the time your terminal is set to settle nightly. If you need to adjust auto settle time - enter time (i.e. 2000 = 8PM Eastern) and let Cartis Support know to update the terminal file to match.